21
Incorporating delays
It can be useful to incorporate a time delay before a command step
in order to take the warm-up phase of the TV set into consideration,
for example.
1. While entering the steps (see Point 6 above) press the
PAUSE
key
at the spot where the time delay should be incorporated.
2. Press a number key corresponding to the seconds by which you
would like to delay (e.g. “4” for a 4-second delay). The maximum
delay is 9 seconds.
Executing macros
1. To execute a macro, briefly press the
MACRO
key once in the
normal mode.
2. Then press the number key where the macro was saved within 20
seconds (
1, 2
or
3
).
Deleting macros
1. Keep the
SETUP
key pressed down for approx. 3 seconds until the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the
SETUP
key
will activate the SHIFT function.)
2. Press the
MACRO
key. The source key will extinguish briefly.
3. Press the number key (“
1
”, “
2
” or “
3
”) of the stored macro that
you would like to delete.
4. Keep the
SETUP
key pressed down until the source key extin-
guishes. The macro is now deleted.
Univ-FB_MD80383_AUS.fm Seite 21 Dienstag, 24. Januar 2006 8:57 08