15
Normal operation
Operating individual devices
After you have finished programming your remote control for your
audio/video devices, the remote control will work in the common
main functions just like the original remote control of the respective
device.
Point your remote control at the desired device and press the relevant
source key. The key will light up briefly but will not remain lit.
Activate the functions by pressing the corresponding function key of
your universal remote control. The source key will light up briefly each
time the key is pressed.
Please note:
- In certain circumstances, not every function of your original
remote control may be directly available on the universal
remote control.
- Especially for newer devices, it might be possible that the
functions are stored to different keys than expected or may not
even be available at all.
In these cases you can use the learn function to transfer the
functions of your original remote control to the desired keys of
the universal remote control (“Learn function”, page 17).
Recording with the video recorder
The
RECORD
key for recording to video recorder must be pressed
twice. This acts as a protection from accidental recordings.
Univ-FB_MD80383_AUS.fm Seite 15 Dienstag, 24. Januar 2006 8:57 08
