9
Time settings in 24 and 12 hour mode
An ‘H’ in the display indicates the 24-hour mode.
If you press the
T/D
key beyond “24”, an ‘A’ will appear. You are now
in the morning hours of the 12-hour mode.
If you press the
T/D
key beyond “12”, a ‘P’ will appear. You are now in
the afternoon hours of the 12-hour mode.
6. Continue pressing
T/D
,
until the
current hour appears.
7. Press
SET
once to save the hour and to call up the settings for the
minutes.
8. Continue pressing
T/D
,
until the
current minute appears.
9. Press
SET
once more and the set time will be displayed.
10. Press
T/D to start the clock (the double dots will flash at one-sec-
ond intervals)
.
Displaying the date and time
After completing the settings, the time will be displayed.
To display the date for a few seconds, briefly press the
T/D
key.
If you would like to see alternating date and time, press
SET
. To shut
off this function, continue pressing
T/D
until the time is displayed.
Displaying the seconds
When the clock appears in the display, you can display the seconds
by pressing
T/D
twice.
When the date appears in the display, you can display the seconds
by pressing
T/D
once.
Using
SET,
you can set the seconds display to “
0
”.
T/D
takes you back to the time.
Univ-FB_MD80383_AUS.fm Seite 9 Dienstag, 24. Januar 2006 8:57 08
