mectron MICROPIEZO, Use And Maintenance Manual

Page: 121 / 262

27
USE
5.4 Instructions for Use
After having connected all the accessories as shown in Chapter 4.3 on page 14 proceed as
follows:
Remove the handpiece from its seat.
1
To load the irrigation circuit use the
function SHORT
FLUSH
by pressing once
the button
FLUSH
on the keyboard. The
water flow rate control will illuminate
and the
FLUSH
button will flash;
NOTE: With handpiece put back,
the FLUSH cycle will not start. For
information, refer to Chapter 12.1 on
page 70 .
2
Press the pedal and release it to start the
procedure.
The system will activate the water pump.
The numbers on the water scale will
progressively turn off (from 6 to 0)
indicating the progress of the procedure.
The FLUSH button will remain lit for the
duration of the procedure;
NOTE: Putting the handpiece back, the
FLUSH
cycle will be interrupted and
the keyboard will be active again by
returning the last configuration used.
3