Page 39
Control Commands
optoNCDT ILR 1181 / 1182
Examples:
a) ASDT
TM1 1
Trigger signal = H > DT is performed
Trigger signal = L > DT is stopped
HIGH
LOW
DT on
DT off
t
b) ASDM
TM1 0
Trigger signal = H > no change in state
Trigger signal = L > DM active, that means, one measurement is triggered
HIGH
LOW
DM on
DM off
t
7.3.15 BRx......Display/Set Baud Rate
Standard setting: 9600
Available baud rate BR settings are: 2400, 4800, 9600, 19200, 38400.
Faulty entries will be rounded to the nearest baud rate.
A fixed data format of eight data bits, with no parity and one stop bit is used.
i
After a change in baud rate setting, the communicating counterpart must also be set to the new baud
rate.
