Chapter 4
INSTALLATION AND USE MANUAL
page
42
Operation
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
4.14.
PRACTICAL EXAMPLE OF WEEKLY/DAILY PROGRAMMING
4.14.1.
Setting of a weekly programme
Let's take the example of a normal factory or office worker who starts
work at 8:00, comes home for lunch at 12:30 and goes back to work
from 14:00 until 18:00.
Among the programmes in the remote control, there is one which best
suits the times when the user is in the home. It is
P07
(
see table in
paragraph 4.12.1). This is how to set it:
PHASE 1
PHASE 2
6
PROGRAM
5
PROGRAM
press button
6
several times until the clock icon is
completely lit.
Press button
5
up to select programme
P07
which
was previously selected.
PHASE 3
SUMMARY
6
PROGRAM
Confirm the selection by pressing button
6
or wait 30
seconds. The programme is confirmed, the clock icon
goes off, only the borders remain visible, and the
LED's that indicated the selected programme go off.
1.
Press button
6
until the clock icon appears
2.
Select the programme with button
5
3.
Confirm the programme with button
6
or wait
30 seconds, after which the remote control
will automatically confirm the selection made
and will exit programming.
4.
The empty timer icon will remain visible. This
means that the programme is set and that
from that moment the stove will start and
stop on its own.
4.14.2.
Setting of a daily programme
Let's look at a user who does not have regular daily hours (a free-lance
worker, for example), but who generally expects to be at home at the
following times:
•
MONDAY
Î
home until 10:00 and from 17:00 on
•
TUESDAY
Î
home until 8:00 and from 14:00 on
•
WEDNESDAY
Î
at home all day and does not wish to set any programme
•
THURSDAY
Î
at home all day
•
FRIDAY
Î
at home until 9:00, from 12:00 to 15:00 and from 18:00 on
•
SATURDAY
Î
at home only after 18:00
•
SUNDAY
Î
at home only after 14:00
Based on these times, from the table in paragraph 4.12.2 the daily
programmes are selected which best suit this routine.
