Chapter 4
INSTALLATION AND USE MANUAL
page
26
Operation
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
4.4.
LOADING PELLETS FOR THE LINK POWERBOX
Fuel is loaded through the front or side door to be installed on the
cladding. It allows access to the fuel filling chute.
To make fuel loading easier, perform the following steps:
•
Open the door and pour half of the sack's contents directly
into the chute, using the scoop provided (A)
•
Then dump the second half of the sack in the same way
Carefully pour the pellets, not too quickly, so that the
pellets do not bounce out of the hopper and spill over
into the cladding
Do not place any type of fuel in the hopper other than
pellets that are compliant with the specifications
provided previously.
Scoop A:
Pellet
