background image

7

1-WARNINGS AND WARRANTY CONDITIONS

Technical Dept. - All rights reserved - Reproduction is prohibited

SPARE PARTS

In the event of a malfunction, consult the retailer who will forward the call to the Technical Assistance Service. 

Use only original spare parts. The retailer or service centre can provide all necessary information regarding spare parts.

We do not recommend waiting for the parts to be worn before having them replaced. It is important to perform regular maintenance.

The company declines all liability if the product and any other accessory is used improperly or modified without 

authorisation.

All parts must be replaced with original spare parts.

WARNINGS FOR THE CORRECT DISPOSAL OF THE PRODUCT.

The owner is the sole party responsible for demolishing and disposing of the product. This must be performed in compliance with laws 

related to safety and environmental protection in force in his/her country.

At the end of its working life, the product must not be disposed of as urban waste.

It must be taken to a special differentiated waste collection centre set up by the local authorities or to a retailer that provides this service.

Separating and recycling prevents potential negative effects on the environment and health (often caused by inappropriately disposing of 

product parts). It also allows materials to be recovered in order to obtain significant savings in energy and resources.

WHY OYSTER

Products constructed with the Oyster technology do not consume the room’s oxygen thanks to their perfectly airtight structure, but take 

all the air form the outer environment (if suitably ducted) and may therefore be installed in all dwellings that require a high degree of 

insulation such as “passive” or “high energy efficiency” houses Thanks to this technology there is no risk of smoke emissions in the room, 

hence no air intakes and relevant aeration grilles are required in the installation premises. Consequently, there will be no more drafts of 

cold air in the room, which make it less comfortable and reduce the overall efficiency of the system. The sealed stove may even be installed 

in the presence of forced ventilation or in premises that might have negative pressure with respect to the outside.

Summary of Contents for EGO 2.0 AIR OYSTER





























































Reviews: