40
12-OPERATION
Feed screw loading function
This function can only be activated when the stove is off and allows the pellets to be loaded into the loading system (feed screw). It can
be used each time the pellets finish in the hopper (see alarm A02). It is useful to prevent failed start-ups (alarm A01) due to the hopper
being empty.
Enable the function as follows:
• Set the first selector to
OFF
• Set the second selector to
MED
• Make sure that
OFF
appears on the display because this function can only be activated with the stove completely cold (off) and the
selector set to
OFF
.
• Press the TEST key 3 times consecutively within 2 seconds
• “OnPlt”
will appear on the display in two subsequent intervals.
• Press the
TEST
key once again when the pellets begin to fall into the brazier to end the
FEED SCREW LOADING
function or wait for
the function to end alone (approx. 3 minutes).
• Proceed with lighting the stove.
Summary of Contents for EGO 2.0 AIR OYSTER
Page 1: ...EN PELLET STOVE EGO 2 0 AIR OYSTER Instructions in English INSTALLATION GUIDE...
Page 58: ......
Page 59: ......
