27
8-LOADING THE PELLETS
Technical Dept. - All rights reserved - Reproduction is prohibited
LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by lifting the hatch.
Pour the pellets in slowly so that it is deposited at the bottom of the hopper.
If loading pellets when the stove is running, open the door of the tank using the stove mitten that comes with the
stove itself.
Never remove the protection grid inside the hopper.
When loading, do not let the pellet bag come into contact with hot surfaces. Do not pour the pellet up to gasket level
otherwise the hatch does not close properly, therefore the stove is not sealed and alarm A18 is triggered.
If the pellet loading hatch (with stove on) is kept opened longer than 30 seconds alarm A18 is triggered.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specifications. Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
When the appliance is running and when it is turned off, most of the stove surfaces are very hot (door, handle, glass,
smoke outlet pipes, etc.). Therefore it is recommended to avoid coming into contact with these parts.
Summary of Contents for EGO 2.0 AIR OYSTER
Page 1: ...EN PELLET STOVE EGO 2 0 AIR OYSTER Instructions in English INSTALLATION GUIDE...
Page 58: ......
Page 59: ......
