iScout® System User’s Manual
29
© McQ Inc 2008
Performing a Clean Boot
WARNING: All application software (installed by the factory and the customer), licenses,
settings and user data will be cleared if you perform this function!
Hold down the
Power key
and press the right soft key
to display a countdown. Continue
to hold
both
keys until the countdown reaches zero, followed by a brief appearance of a boot
screen. Continue to hold down both keys until a screen appears warning that if you continue,
this operation will clear the persistent store. Follow the instructions on the screen ONLY if you
want to completely clear your unit.
NOTE: Installed GPS applications will need to be reinstalled, but certain configuration
parameters of the internal GPS receiver (baud, parity, etc.) will remain unchanged.
Notification LEDs
At the top of the unit are two LEDs that provide status
information (Figure 5-4). The LED states are described in
the following table.
LED
COLOR
FUNCTION
Battery Status
Off
On battery power
Solid Yellow
Charging on AC
adapter
Solid Green
Fully charged on AC
adapter
Blinking Yellow Battery problem
during charging
(temperature out of
range, defective or
missing battery)
Notification
Off
No notifications
Blinking
Appointment/task due
Table 1: Notification LEDs
Figure 5-4: Battery Status and
Notification LEDs
