iScout® System User’s Manual
17
© McQ Inc 2008
3 iScout® Sensor Set Up
The iScout® sensor is set up using a
Wireless Mobile Relay (WMR)
and a
Handheld
Programmer Monitor (HHPM)
(Figure 3-1). There are two basic modes of operation for the
sensor unit:
Emplacement Mode
, used to configure the sensor and
Normal Mode
, the mode for
standard monitoring operations. A third mode, called
Sleep
is a programmable mode that
disables the sensor’s detection abilities to save power but is only used if programmed by the
user.
Figure 3-1: Hand Held Programmer Monitor (HHPM) and Wireless Remote Relay (WMR)
