iScout® System User’s Manual
16
© McQ Inc 2008
9.
When finished entering data, using the stylus hit the
OK
button in the upper right hand
corner and when asked to
Configure Device?
Select
Yes
. The HHPM will send the
configuration to the device, which will respond with its updated configuration. Once
verified, select
OK
in the upper right-hand corner, then
No
when asked
Configure
Device?
10.
Using the HHPM, select the
Begin Operation
from the
Devices Menu
.
11.
A recommended procedure is to request a status from the unit after it has begun normal
operations. Once the status has been received, the
LQI
button will display a table
indicating RF signal strength of nearby units.
12.
Disconnect the HHPM cable from the device if a cable connection is used.
Figure 2-5: LHCN Configuration Editor
| Algorithms Tab
