iScout® System User’s Manual
18
© McQ Inc 2008
3.1
Set Up Procedure for iScout® Sensor
It is assumed that the operator is already familiar with the HHPM and WMR (refer to the
previous sections) and therefore, only applications specific to the set up of the iScout® sensor
will be addressed here.
1.
Turn on the WMR by turning the black knob on the top of the device (Figure 3-1).
2.
Turn on the HHPM and start the OmniSense® application. Make sure that the HHPM
Communication Preference
(Figure 3-2) is set to
Bluetooth (WMR)
. See Comms
Preferences in Section 5.4.2.
Figure 3-2: Comms Port Window
