McIntosh MX122, Owner'S Manual

Page: 20 / 48

20
VIDEO SETUP MENU, con't
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Output Settings, con't
i/p Scaler ●Analog Off, Analog &HDMI Refer to the bottom of Video Screen for Information.
Resolution (analog) ●Auto 480p/576p, 1080i, 720p, 1080p
1080p:24Hz, 4K, 4K (60/50)
Requires i/p Scaler set to Analog or Analog HDMI, it will then convert the analog
input signal to the selected Digital Output Signal Resolution. Refer to the bottom of
Video Screen for Information.
Resolution (HDMI) ●Auto 480p/576p, 1080i, 720p, 1080p
1080p:24Hz, 4K, 4K (60/50)
Requires i/p Scaler set to Analog HDMI, it will then convert the analog input signal to
the selected Digital Output Signal Resolution. Refer to the bottom of Video Screen for
Information.
Progressive Mode ●Auto Video, Video and Film Refer to the bottom of Video Screen for Information.
Aspect Ratio ●16:9 4:3 Refer to the bottom of Video Screen for Information.
Analog Video Out
Zone ●MAIN ZONE ZONE3 Refer to the bottom of Video Screen for Information.
On Screen Display
Volume ●Bottom Top, Off Refer to the bottom of Video Screen for Information.
Info ●On Off Refer to the bottom of Video Screen for Information.
Now Playing ●Always On Always Off Refer to the bottom of Video Screen for Information.
TV Format Format ●NTSC PAL Refer to the bottom of Video Screen for Information.
INPUTS SETUP MENU
MENU ITEM SUB MENU SELECTION OPTION(S) DESCRIPTION
Inputs
Input Assign Refer to Separate Sheet "Mc MX122 Menu-4" and the Top Left Video Screen for the Default Input Assignment Information. All of the default
Input Names have already been assigned to the various signal type connectors on the rear panel of the MX122. They include HDMI (Digital Video
and Audio), Digital Audio (Coaxial and Optical), Analog Audio, Component Video (Analog Video Signals) and Composite Video (Analog Video
Signals).
In order to reassign a given Input Name to a different Input Connector Type, first disable the existing input connector type by switching it Off using
the dash symbol (-). Then for the same Input Name, select a different Input Connector Type with nothing connected to it.
Source Renaming Refer to Separate Sheet "Mc MX122 Menu-4" and the two "Rename" Video Screens. All of the default Input Names (match the Input Assign
Names) have direct access Push-buttons located on the HR088 Remote Control. When an Input is renamed (like the AUX Input is renamed to CD2)
access CD2 by pressing the AUX Push-button or use the  INPUT  Push-buttons to select AUX by watching either the Front Panel Information
Display or the TV/Monitor on-Screen Display.
Hide Source
●Show Hide
Refer to Separate Sheet "Mc MX122 Menu-4" and the Top Right Video Screen, Refer
to the bottom of Video Screen for Information.
Notes: The ● indicates the default setting. When there are grayed out menu items appearing, other Setup Mode Options need to be activated first in order to make changes.