McIntosh MX122 Owner'S Manual Download Page 11

Page: 11 / 48

MX122 Main Zone Input Connections

The MX122 has the ability to automatically switch

power On/Off to Source Components via the Trig

ger (Power Control) Connections. With an external

sensor(s) connected, remote control operation of the

system is possible.

The Main Zone connection instructions below,

together with the MX122 Input Connection Diagram

located on the separate folded sheet “

Mc2A

”, is an ex

ample of a typical Home Theater System. Your system

may vary from this, however the actual components

would be connected in a similar manner. For addition

al information refer to “Connector and Cable Informa

tion” on page 6.

Note: The following source component and sensor con-

nections made to the MX122 are using the default

settings. To make changes to the default settings

proceed to Setup Mode starting on page 16.

Power Control Connections:

1. Connect a Control Cable from the MX122 TRIG

ger (Power Control) 1 Jack to the Power Control

Remote In on the Turntable.

2. Connect a Control Cable from the Turntable

Power Control Remote Out Jack to the Streaming

Audio Player Trigger In Jack.

3. Connect a Control Cable from the Streaming Au

dio Player Trigger Out Jack to the AM/FM Tuner

Power Control In Jack.

4. Connect a Control Cable from the AM/FM Tuner

Power Control Out Jack to the Audio/Video Disc

Player Power Control In Jack.

5. Connect a Control Cable from the Audio/Video

Disc Player Control Out Jack to the Media Server

PWR CTRL (Power Control) In Jack.

6. Connect any additional McIntosh Components in

a similar manner, as outlined in steps 1 thru 5.

7. Connect a Control Cable from the Media Server

PWR CTRL (Power Control) Out Jack to the Pow

er Amplifier Main Zone Power Control In Jack.

Data Control Connections:

8. Connect a Control Cable from the MX122 DATA

OUT Jack to one end of a Stereo 3.5mm "Y"

adapter.

9. Connect a Control Cable from the AM/FM Tuner

DATA IN Jack to another end of the Stereo 3.5mm

"Y" adapter.

10. Connect a Control Cable from the Audio/Video

Disc Player DATA IN Jack to the remaining end

of the Stereo 3.5mm "Y" adapter.

IR In Connections:

11. Optionally, connect the Control Cable from the

External IR Sensor to the MX122 IR IN Main

Zone Jack.

Note: Refer to page 5 for information on compat-

ible Sensors and page 6 for Cable/Connection

information.

Analog Audio Connections:

12. Connect Balanced Cables from the MX122 XLR

BALANCED INPUT connectors to the Media

Server Audio Output Balanced connectors.

13. Connect Audio Cables from the MX122 PHONO

Jacks to the Turntable Out Jacks.

14. Connect Audio Cables from the MX122 TUNER

INPUT Jacks to the AM/FM Tuner UNBALanced

Output Jacks.

Digital Audio Connections:

15. Connect a Digital Coaxial Cable from the MX122

DIGITAL AUDIO IN COAX 2 (DVD) Optical

Connector to the Streaming Audio Player Digital

Coaxial Output Connector.

HDMI Connections:

16. Connect a HDMI Cable from the MX122 HDMI

INPUT 1 (CBL/SAT) Connector to the Satellite

Receiver HDMI Out Connector.

17. Connect a HDMI Cable from the MX122 HDMI

INPUT 5 (MEDIA PLAYER) Connector to the

Media Server HDMI Out Connector.

18. Connect a HDMI Cable from the MX122 HDMI

INPUT 3 (BLU-RAY) Connector to the Audio/

Video Disc Player HDMI Out Connector.

Ground Connections:

19. Connect a Ground Cable from the MX122 GND

Binding Post to the Turntable GND Binding Post.

Computer/Network Connections:

20. Using a CAT 5/6 Ethernet Cable, connect the

cable from the Network Router/Switch to the

NETWORK connector on the Rear Panel of the

MX122.

Note: If there is no Network Router/Switch available,

a computer may be connected to the MX122

Network Connector by using an Ethernet

Crossover cable/adapter. Refer to “Connector

and Cable Information” on page 6.

Proceed to Main Zone Output Connections on the

next page.

Summary of Contents for MX122

















































Search results

Summary of Contents for MX122

Reviews:

Related manuals for MX122

Brands by name

Popular brands

McIntosh MX122, Owner'S Manual

Search results

Summary of Contents for MX122

Reviews:

Related manuals for MX122

Brands by name

Popular brands