31
Audyssey Setup, con't
The following screen is displayed during the
analysis. Refer to figure 24.
Configure the settings as preferred.
• Dynamic EQ corrects the frequency response in
consideration of the audio characteristics of the
room and human hearing ability so that sound can
be heard even at low volume.
This is recommended when using the unit with the
volume turned down, e.g. when enjoying a movie
or TV program in the middle of the night.
• Dynamic Volume adjusts the output volume to
the optimal level while constantly monitoring
the level of the audio input to the unit. Optimal
volume control is performed automatically with
-
out any loss in the dynamism and clarity of the
sound when, for example, the volume suddenly
increases for commercials shown during television
programs.
12. When the analysis and storage ends, unplug the
Sound Calibration Microphone from the SETUP
MIC Jack on the Rear Panel and press Next.
Refer to figure 25.
13. Select "Details" and press Enter to verify the
measurement results.
• Subwoofers may measure a greater reported dis
-
tance than the actual distance due to added electri-
cal delay common in subwoofers.
Note: Do not change the speaker connections or
subwoofer volume after Audyssey
®
Setup.
If these are changed, run Audyssey
®
Setup
again in order to configure the optimum
equalizer settings.
Audyssey Setup
Audyssey Dynamic EQ maintains bass, clarity and surround
sound at low volumes letting you enjoy late-night movies
and television.
Turn on the Dynamic EQ?
Yes
No
Analyzing room data
50%
Figure 24
Audyssey Setup
Now Analyzing and correcting your room data.
Please disconnect the microphone from your AV preamp.
Next
Back
Applying room corrections
100%
Figure 25
Summary of Contents for MX122
Page 33: ...33 ...
