background image

23

Setup Mode, con't

NETWORK SETUP MENU Con't

MENU ITEM

SUB MENU 

SELECTION

OPTION(S)

DESCRIPTION

Connection

●Wired or Wireless

Wired (Ethnernet),

 Wireless (Wi-Fi)

If the MX122 is already setup for a Wired ((Ethernet) operation and Wireless (Wi-Fi) 

is selected remove the Wired Ethernet Cable from the rear panel of the MX122 before 

proceeding. When the MX122 is setup for Wireless operation and it is to be switched 

over to Wired ((Ethernet) operation, then connect the Wired Ethernet Cable to the 

rear panel of the MX122 before proceeding. Refer to the Video Screen for additional 

Information.

Settings

DHCP

●On

Off

DHCP is an automatic network process making all the necessary network settings 

for the MX122. If DHCP Off is selected, the following information will need to be 

entered manually: - IP Address, - Subnet Mask, - Default Gateway, - Primary and - 

Secondard DNS, Refer to the bottom of Video Screen for Information.

Proxy

●Off

On(Address), On(Name)

When the MX122 is connected to a Proxy Server, select On and then enter the follow

-

ing: - Address and  - Port, Refer to the bottom of Video Screen for Information.

IP Control

●Always On

Off in Standby

Refer to the bottom of Video Screen for Information.

Friendly Name

McIntosh:[MX122]

Home Theater, Living Room, 

Family Room, Guest Room, 

Kitchen, Dining Room, Master 

Bedroom, Bedroom, Den, Of-

fice, Other

Refer to the bottom of Video Screen for Information.

Diagnostics

Refer to Video Screen for status of the Physical Connection, Router Access and Internet Access

GENERAL SETUP MENU

MENU ITEM

SUB MENU 

SELECTION

OPTION(S)

DESCRIPTION

Language

●English

Francais, Espanol 

Refer to the bottom of Video Screen for Information.

ZONE2 Setup

Bass

●0dB

-10dB to +10dB

Refer to the bottom of Video Screen for Information.

Treble

●0dB

-10dB to +10dB

Refer to the bottom of Video Screen for Information.

High Pass Filter

●Off

On

Refer to the bottom of Video Screen for Information.

Lch Level

●0dB

-12dB to +12dB

Refer to the bottom of Video Screen for Information.

Rch level

●0dB

-12dB to +12dB

Refer to the bottom of Video Screen for Information.

Channel

●Stereo

Mono

Refer to the bottom of Video Screen for Information.

HDMI Audio

●Through

PCM

Refer to the bottom of Video Screen for Information.

Volume Level

●Variable

1 to 98

Refer to the bottom of Video Screen for Information.

Volume Limit

●70

80, Off, 60

Refer to the bottom of Video Screen for Information.

Notes: The ● indicates the default setting. When there are grayed out menu items appearing, other Setup Mode Options need to be activated first in order to make changes. 

Summary of Contents for MX122

















































Reviews: