7
2 - SAFETY PRECAUTIONS
17. This electric powered saw is classified according to
CAN/CSA-Z62.1-03 as a Class 2C saw. It is intended
for infrequent use by homeowner’s, cottagers and
campers, and for such general applications such as
clearing, pruning, cutting firewood, etc. It is not intend-
ed for prolonged use. If the intended use involves pro-
longed periods of operation, this may cause circulato-
ry problems in the user’s hands due to vibration. It
may be appropriate to use a saw having an anti-vibra-
tion feature.
18. Safety clothing required by your safety organizations,
government regulations, or your employer should be
used; otherwise, snug fitting clothing, safety footwear,
safety chaps and hand and ear protection should be
worn.
19. When felling, keep at least two (2) tree lengths
between yourself and your fellow workers.
NOTE:
Low-kickback saw chain is chain that has met the
kickback performance requirements of ANSI/UL 1662-1995
and is in accordance withCAN/CSA-Z62.1-03.
2-4. GENERAL SAFETY PRECAUTIONS
FOR CHAIN SAW USERS
1.
Fatigue causes carelessness. Be more cautious
before rest periods and towards the end of your shift.
2.
Personal protective clothing required by your safety
organizations, government regulations, or your
employer should be used. At all times when using a
chain saw, snug-fitting clothing, safety chaps protec-
tive eye wear, safety footwear, and hand, leg, and
hearing protection should be worn.
3.
When felling, keep at least two(2)tree lengths away
from your fellow workers.
4.
Plan your work, ensuring an obstacle-free work area
and, in the case of felling, at least one escape path
from the falling tree.
5.
Follow the instructions in your operator’s manual for
starting the chain saw and control the chain saw with
a firm grip on both handles when it is in operation.
Keep handles dry, clean, and free of oil.
6.
When transporting your chain saw, use the appropri-
ate transportation covers, which should be available
for the guide bar and saw chain.
7.
Never operate a chain saw that is damaged or improp-
erly adjusted or that is not completely and securely
assembled. Be sure that the saw chain stops moving
when the power control system trigger is released.
Never adjust the guide bar or saw chain when the
motor is operating.
8.
Do not attempt a pruning or limbing operation in a
standing tree unless specifically trained to do so.
9.
Guard against kickback. Kickback is the upward
motion of the guide bar that occurs when the saw
chain, at the nose of the guide bar, contacts an object.
Kickback can lead to dangerous loss of control of the
chain saw.
10. A chain saw is intended for two-handed use. Serious
injury to the operator, helpers, and/or bystanders
could result from one-handed operation.
11. See section 1-6 for symbol defirmtions, page 14.
12. When carrying a chain saw with the motor running,
engage the chain brake.
13. Keep other persons or animals a safe distance away
from a running chain saw or the area where a tree is
being felled.
14. Use extreme caution when cutting small brush and
saplings because slender material can catch the saw
chain and be whipped toward you.
15. When cutting a limb that is under tension or compres-
sion, be alert for springback.
2-5. MORE ABOUT KICKBACK
WARNING
DANGER! BEWARE OF KICKBACK!
Kickback can lead to dangerous loss of control of the chain
saw and result in serious or fatal injury to the saw operator
or to anyone standing close by. Always be alert because
rotational kickback and pinch kickback are major chain saw
operational dangers and the leading cause of most acci-
dents.
BEWARE OF:
ROTATIONAL KICKBACK
(Figure 2-5A)
A = Kickback path
B = Kickback reaction zone
2-5A
B
A
A
A
6
15. OUTDOOR EXTENSION CORDS: Use only exten-
sion cords intended for use outdoor use and so
marked accordingly.
16. STAY ALERT: Watch what you are doing. Use com-
mon sense. Do not operate the chain saw when you
are tired. Keep all parts of the body away from the saw
chain when the motor is operating. Before you start
the saw, make sure the saw chain is not contacting
anything.
17. CHECK DAMAGED PARTS: Before further use of the
chain saw, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced by an authorized service center
unless otherwise indicated elsewhere in this instruc-
tion manual.
18. GUARD AGAINST KICKBACK:
WARNING:
Kickback may occur when the
nose or tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain in the cut. Tip
contact in some cases may cause a lightening fast reverse
action, kicking the guide bar up and back towards the oper-
ator. Pinching the saw chain along the top of the guide bar
may push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of
the saw which could result in serious injury to the user. The
following precautions should be followed to minimize kick-
back:
A.
GRIP SAW FIRMLY: Hold the chain saw firmly
with both hands when the motor is running. Use
a firm grip with thumbs and fingers encircling the
chain saw handles. Note : If a manual oiler con-
trol is provided, additional or modified instruc-
tions regarding its use is to be provided.
B.
Do not over reach.
C.
Keep proper footing and balance at all times.
D.
Don’t let the nose of the guide bar contact a log,
branch, ground or other obstruction.
E.
Do not cut above shoulder height.
F.
Use devices such as low kickback chain, guide
bar nose guards, chain brakes and special guide
bars that reduce the risks associated with kick-
back.
G. Only use replacement bars and chains specified
by the manufacturer or the equivalent.
H.
There are no other replacement components for
achieving kickback protection in accordance with
CSA Z62.3.
19. POWER SUPPLY: Connect the chain saw to correct
voltage, that is, be sure that the voltage supplied is the
same as that specified on the nameplate of the tool.
2-3. OTHER SAFETY PRECAUTIONS
1.
DO NOT operate a chain saw that is damaged,
improperly adjusted, or not completely and securely
assembled. Be sure that the saw chain stops moving
when the trigger is released.
2.
DO NOT attempt operations beyond your capacity or
experience.
3.
DO NOT operate a chain saw with one hand! Serious
injury to the operator, helpers, or bystanders may
result from one-handed operation. A chain saw is
intended for two-handed use.
4.
TO REDUCE potential for electric shock, do not oper-
ate the saw on wet or slippery surfaces, or during
snow storms, rain storms, and other adverse weather
conditions.
5.
Keep the handles dry, clean, and free of oil or grease.
6.
DO NOT allow dirt, debris or sawdust to build up on
the motor or outside air vents.
7.
Follow the manufacturer’s sharpening and mainte-
nance instructions for the saw chain.
8.
Cut at high motor speeds.
9.
Operation of a chain saw should be restricted to
mature, properly instructed individuals.
10. Your chain saw is intended for occasional homeowner
use. It is not made for continuous heavy duty use.
11. DO NOT FORCE a small saw to do a job requiring a
heavier duty unit.
12. EXAMINE THE ELECTRICAL SWITCHES. Do not
use the chain saw if the switches do not properly turn
on and off. Do not attempt to make any repairs to the
electric switches. Take your saw to a McCulloch
Authorized Service Center.
13. MAINTAIN EXTENSION CORDS. Inspect the exten-
sion cords periodically and replace if damaged. Only
use power cords that are suitably marked for outdoor
use.
14. DO NOT OPERATE YOUR CHAIN SAW near or
around flammable liquids or gases, whether in or out
of doors. An explosion and/or fire may result.
15. All chain saw service, other than the items listed in the
user manual safety and maintenance instructions,
should be performed by competent chain saw person-
nel. Do not attempt to repair it yourself; there are no
user serviceable parts inside.
16. NEVER REMOVE, modify or make inoperative any
safety device furnished with your unit. The CHAIN
BRAKE
®
/Hand Guard is a major safety feature. The
saw will not run when the CHAIN BRAKE
®
is tripped.
2 - SAFETY PRECAUTIONS
