Black plate (245,1)
NOTE
l
This mode may not be usable
depending on the portable audio
device to be connected.
l
Before using the auxiliary jack/USB
port, refer to the instruction manual
for the portable audio device.
l
Use a commercially-available, non-
impedance (3.5 ) stereo mini plug
for connecting the portable audio
unit to the auxiliary jack. Before
using the auxiliary jack, read the
manufacturer's instructions for
connecting a portable audio unit to
the auxiliary jack.
l
To prevent discharging of the battery,
do not use the auxiliary input for
long periods with the engine off or
idling.
l
When connecting a device to the
auxiliary jack or USB port, noise
may occur depending on the
connected device. If the device is
connected to the vehicle's accessory
socket, the noise can be reduced by
unplugging it from the accessory
socket.
l
Insert the plug to the auxiliary jack/
USB port securely.
l
Insert or pull out the plug with the
plug perpendicular to the auxiliary
jack/USB port hole.
l
Insert or remove the plug by holding
its base.
q
How to use AUX mode
Audio Unit
Audio Control
Switches
1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
3. Press the source change button (
) of
the audio unit or the mode switch
(
) of the audio control switches
on the steering wheel to change to the
AUX mode.
NOTE
l
When the device is not connected to
the auxiliary jack, the mode does not
switch to the AUX mode.
l
Set the volume of the portable audio
unit to the maximum within the
range that the sound does not
become distorted, then adjust the
volume using the power/volume dial
of the audio unit or the up/down
switch of the audio control switch.
l
Audio adjustments other than audio
volume can only be done using the
portable audio device.
l
If the connection plug is pulled out
from the auxiliary jack while in
AUX mode, noise may occur.
Interior Comfort
Audio System
6-51
Mazda5_8DF6-EI-13J_Edition7 Page245
Thursday, March 9 2017 8:35 PM
Form No.8DF6-EI-13J
