Black plate (233,1)
Seek tuning
Pressing the seek tuning button (
,
)
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the
button, the frequency will continue
changing without stopping.
Scan tuning
Press the scan button (
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
button (
) again during this interval.
Preset channel tuning
The 6 preset channels can be used to store
6 MW/LW and 12 FM stations.
1. To set a channel first select MW/LW,
FM1, or FM2. Tune to the desired
station.
2. Depress a channel preset button for
about 2 seconds until a beep is heard.
The preset channel number and station
frequency will be displayed. The
station is now held in the memory.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select MW/
LW, FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are not
known.
Press and hold the auto memory button
(
) for about 2 seconds until a beep
is heard; the system will automatically
scan and temporarily store up to 6 stations
with the strongest frequencies in each
selected band in that area.
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed. Press and
release the auto memory button (
)
to recall stations from the auto-stored
stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
NOTE
If no stations can be tuned after
scanning operations,
“
A
”
will be
displayed.
Radio Data System (RDS)
Alternative frequency (AF)
AF functions on FM stations. Press the
audio control dial and select the AF mode
to turn it on and
“
AF ON
”
will be
displayed. If the radio reception of the
current station weakens, the system
switches to an alternative station
automatically.
If you wish to continue a regional
programme, press the audio control dial
and select the REG mode to turn it on.
“
REG ON
”
is displayed.
To cancel it, press the audio control dial
and select the REG mode to turn it off.
“
REG OFF
”
is displayed.
Interior Comfort
Audio System
6-39
Mazda5_8DF6-EI-13J_Edition7 Page233
Thursday, March 9 2017 8:35 PM
Form No.8DF6-EI-13J