Mazda Mazda5 Owner'S Manual Download Page 274

Page: 274 / 380

Black plate (274,1)

Jack

To remove the jack

1. Remove the cover.

2. Turn the wing bolt and jack screw

anticlockwise.

Win

bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing front and turn
the wing bolt clockwise to temporarily
tighten it.

2. Turn the jack screw in the direction

shown in the figure.

Win

bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.

Maintenance

Always keep the jack clean.

Make sure the moving parts are kept
free from dirt or rust.

Make sure the screw thread is
adequately lubricated.

7-4

In Case of an Emergency

Flat Tyre

Mazda5_8DF6-EI-13J_Edition7 Page274
Thursday, March 9 2017 8:36 PM

Form No.8DF6-EI-13J

Summary of Contents for Mazda5





























































































































































































































































































































































































Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands

Mazda Mazda5, Owner'S Manual

Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands