Home
/
Mazda
/
Mazda5
/
Owner'S Manual

Mazda Mazda5, Owner'S Manual, Page: 138 / 380

Share

Page: 138 / 380

Mazda Mazda5 Owner'S Manual Download Page 138

Black plate (138,1)

NOTE

l

If any one of the following conditions occurs, extra time may be required for the
engine to stop automatically.

l

Battery power is depleted as a result of not using the vehicle for a long period.

l

The ambient temperature is high or low.

l

The battery leads have been disconnected for battery replacement and then
reconnected.

l

For safety reasons, if any one of the following operations is performed after the
engine has been automatically stopped, the i-stop warning light (amber) illuminates
and the engine will not restart automatically even if the brake pedal is released. If this
occurs, use the standard engine starting procedure to start the engine.

l

The bonnet is opened.

l

The driver intends to get out of the vehicle while the shift lever is in the D/M
position (not second gear fixed mode) (driver's seat belt is unfastened and driver's
door is opened).

5-8

Driving Your Mazda

Starting and Driving

Mazda5_8DF6-EI-13J_Edition7 Page138
Thursday, March 9 2017 8:34 PM

Form No.8DF6-EI-13J

«
...
136
137
138
139
140
...
»

Summary of Contents for Mazda5





























































































































































































































































































































































































Reviews:

No comments