Black plate (35,1)
WARNING
Instructions for Use of Seat Belt Assemblies:
Seatbelts are designed to bear upon the bony structure of the body, and should be
worn low across the front of the pelvis or the pelvis, chest and shoulders, as
applicable; wearing the lap section of the belt across the abdominal area must be
avoided.
Seatbelts should be adjusted as firmly as possible, consistent with comfort, to provide
the protection for which they have been designed. A slack belt will greatly reduce the
protection afforded to the wearer.
Care should be taken to avoid contamination of the webbing with polishes, oils and
chemicals, and particularly battery acid. Cleaning may safely be carried out using
mild soap and water. The belt should be replaced if webbing becomes frayed,
contaminated or damaged.
It is essential to replace the entire assembly after it has been worn in a severe impact
even if damage to the assembly is not obvious.
Belts should not be worn with straps twisted.
Each belt assembly must only be used by one occupant; it is dangerous to put a belt
around a child being carried on the occupant's lap.
No modifications or additions should be made by the user which will either prevent
the seat belt adjusting devices from operating to remove slack, or prevent the seat belt
assembly from being adjusted to remove slack.
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep them
clean. For more details about cleaning the seat belts, refer to
“
Seat Belt Maintenance
”
(page 8-57).
Ring
Essential Safety Equipment
Seat Belt Systems
2-25
Mazda5_8DF6-EI-13J_Edition7 Page35
Thursday, March 9 2017 8:33 PM
Form No.8DF6-EI-13J
