Black plate (142,1)
When flashing
This light flashes once per second if the
brake pedal is not depressed with
sufficient force. There may be instances
when you may have not applied enough
brake force. In this case, depress the brake
pedal a little more strongly.
q
i-stop Warning Beep
l
If the driver's door is opened while the
i-stop function is operating and the
engine is stopped automatically, the
beep sounds to notify the driver that
the engine is stopped. When the
driver's door is closed the beep stops.
l
For safety reasons, if any of the
following operations is performed
while the i-stop function is operating,
the beep sound will be heard and the
engine will not restart automatically
even if the brake pedal is released. If
this occurs, use the standard engine
starting procedure to start the engine.
The driver intends to get out of the
vehicle while the selector lever is in the
D/M position (not in second gear fixed
mode), the driver's seat belt is
unfastened and the driver's door is
opened.
q
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds
and the i-stop warning light (amber) in the
instrument cluster illuminates. The i-stop
function can be turned back on by
pressing the switch again until the beep
sounds and the i-stop warning light
(amber) turns off.
NOTE
If the i-stop function was turned off
using the i-stop OFF switch, the system
will resume operation the next time the
engine is started.
5-12
Driving Your Mazda
Starting and Driving
Mazda5_8DF6-EI-13J_Edition7 Page142
Thursday, March 9 2017 8:34 PM
Form No.8DF6-EI-13J
