Mazda Mazda5 Owner'S Manual Download Page 335

Page: 335 / 380

Black plate (335,1)

6. Disconnect the bulb from the socket.

Brake lights/Tail lights

Rear direction indicator lights

7. Install the new bulb in the reverse order

of the removal procedure.

NOTE

To install the unit, insert the hooks (2
locations) on the unit side into the clips
on the vehicle side, and install the unit.

Clip

Hook

Reverse light, Rear fog light

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Remove the cover with a cloth-

wrapped flathead screwdriver to the
cover.

3. Turn the socket and bulb assembly

anticlockwise and remove it.

Maintenance and Care

Owner Maintenance

8-39

Some models.

Mazda5_8DF6-EI-13J_Edition7 Page335
Thursday, March 9 2017 8:36 PM

Form No.8DF6-EI-13J

Summary of Contents for Mazda5





























































































































































































































































































































































































Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands

Mazda Mazda5, Owner'S Manual

Search results

Summary of Contents for Mazda5

Reviews:

Related manuals for Mazda5

Brands by name

Popular brands