Black plate (314,1)
5. Check the ATF level. If the ATF level
does not reach 5 mm (0.2 in) from the
end of the dipstick, consult an expert
repairer, we recommend an Authorised
Mazda Repairer to have the vehicle
inspected.
CAUTION
If there is no ATF adhering to the
dipstick even after the engine has been
warmed up, do not drive the vehicle.
Otherwise, the automatic transaxle
could be damaged.
6. With the brake pedal depressed, shift
the shift lever from the park position
(P) to drive position (D) at intervals of
several seconds, and then shift to the
park position (P) again.
7. Drive 5 km (4 mile) or more in a city.
8. Park on a level surface, shift the shift
lever to the park position (P) and set
the parking brake firmly.
9. While the engine is still idling, pull out
the dipstick and wipe it clean, and then
reinsert it.
10. Check the ATF level. The proper fluid
level indicated on the dipstick should
be as follows.
Full
OK
Low
If the ATF level does not reach the
appropriate level, consult an expert
repairer, we recommend an Authorised
Mazda Repairer to have the vehicle
inspected.
8-18
Maintenance and Care
Owner Maintenance
Mazda5_8DF6-EI-13J_Edition7 Page314
Thursday, March 9 2017 8:36 PM
Form No.8DF6-EI-13J
