Mazda 2014 MX-5 Miata, Owner'S Manual

Page: 282 / 453

Black plate (281,1)
9. Say: [Beep]
“
XXXX
”
(Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l
Some devices accept only a particular
pairing code (Usually,
“
0000
”
or
“
1234
”
).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
l
Record the code as it will be used to
program your phone in Step 16.
10.
Prompt:
“
Pairing code XXXX (4-
digit number). Is this correct?
”
11. Say: [Beep]
“
Yes
”
or
“
No
”
12. If
“
Yes
”
, go to Step 13.
If
“
No
”
, the procedure returns to Step
8.
13.
Prompt:
“
Start pairing procedure on
phone. See phone's manual for
instructions.
”
14. Using the mobile telephone, perform
a search for the Bluetooth
®
device
(Peripheral device).
NOTE
For the operation of the mobile telephone,
refer to its instruction manual.
15. Select
“
Mazda
”
from the device list
searched by the mobile phone.
16. Input the 4-digit pairing code set in
Step 9 to the mobile telephone.
17.
Prompt:
“
Please say the name of the
phone after the beep.
”
18. Say: [Beep]
“
XXXX - - -
”
(Speak a
“
phone tag
”
, an arbitrary name for the
phone.)
Example:
“
Stan's phone.
”
NOTE
Speak a programmed
“
phone tag
”
within 10
seconds.
If more than two mobile telephones are to be
programmed, they cannot be programmed with
the same or similar
“
phone tag
”
.
19. Prompt:
“
Adding XXXXXX - - -
(Ex.
“
Stan's phone
”
) (Phone tag). Is
this correct?
”
20.
Say:
[Beep]
“
Yes
”
21.
Prompt:
“
Assign a priority for this
phone between 1 and 7, where 1 is
the phone used most often.
”
22.
Say:
[Beep]
“
1
”
(Speak a number of
the desired priority from 1 to 7.)
NOTE
l
Normally,
“
1
”
is to be input (Highest
priority).
l
If more than two mobile telephones are
registered, input the priority order from 1 to
7.
23.
Prompt:
“
XXXXXX - - - (Ex.
“
Stan's phone
”
) (Phone tag) set to
priority X (Priority number). Is this
correct?
”
24. Say: [Beep]
“
Yes
”
25. Prompt:
“
Pairing complete
”
After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the voice recognition/hands-
free switch again, or by pressing the voice
recognition/hands-free switch first after
switching the ignition from OFF to ACC,
the system reads out a voice guidance,
“
XXXXXX - - - (Ex.
“
Stan's phone
”
)
(Phone tag) is connected
”
. If two or more
telephones are registered, the one with the
highest priority is selected.
Interior Comfort
Bluetooth® Hands-Free
6-67
MX-5_8DG7-EC-13F_Edition2 Page281
Tuesday, September 24 2013 10:12 AM
Form No.8DG7-EC-13F