Mazda 2014 MX-5 Miata, Owner'S Manual

Page: 259 / 453

Black plate (258,1)
NOTE
l
If an ID code is not input for ten seconds,
“
Err
”
is displayed and it returns to the
former display.
l
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
Lock cancellation
Setting condition: SAT mode
(Releasing a locked channel)
1. Select a channel to be released by
turning the manual tuning dial.
Example: Select the locked channel
(i.e. 100). At this time,
“
SR1 LOCK 100
”
is displayed.
(Registered ID code input preparation)
2. Press and hold the scan button ( ),
then press channel preset button 6.
Hold both buttons together for 1.5
seconds.
3.
“
ENTER PIN
”
appears for three
seconds which indicates that it is in
code input mode.
4.
“
SR1 - - - -
”
appears, which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example:
When the registered ID code is
“
2323
”
,
input
“
2323
”
. At this time
“
SR1 2323
”
is displayed.
NOTE
If
“
Err
”
is displayed, go to the
“
INITIALIZATION OF ID CODE
”
section to
reset the ID code to [0000].
(Registered ID code input
determination)
6. Determine the input code by pressing
the scan button ( ).
7. If it does not match the registered code,
“
SR1 Err
”
is displayed and then it
returns to
“
SR1 - - - -
”
.
8. If it matches the registered code,
“
SR1 UNLOCK
”
appears for three
seconds which indicates that the code
input has been completed.
9.
“
SR1 100
”
appears which indicates that
the parental lock is off. At this time,
sound is heard.
NOTE
l
If an ID code is not input for ten seconds,
“
Err
”
is displayed and it returns to the
former display.
l
Channel preset buttons 1, 2, 3, 4 and the
scan button (
) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
6-44
Interior Comfort
Audio System
MX-5_8DG7-EC-13F_Edition2 Page258
Tuesday, September 24 2013 10:12 AM
Form No.8DG7-EC-13F