Mazda 2014 MX-5 Miata Owner'S Manual Download Page 106

Page: 106 / 453

Black plate (105,1)

Opening the Power Retractable
Hardtop

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual
transmission in Neutral.

3. Apply the parking brake with the brake

pedal depressed.

4. Start the Engine.

NOTE

Do not open/close the hardtop with the engine
stopped. Otherwise the vehicle's battery power
could be depleted.

5. With the lock release button depressed,

pull the top latch outward to unlock.

Lock release button

Top latch

6. Verify that the operation indicator light

is illuminated and the lock is detached.

7. Press and hold the open button until the

hardtop opens completely.

NOTE

When the open switch is pressed, a beep
sound is heard.

The hardtop keeps opening and the
operation indicator light flashes while the
open switch is pressed.

If the switch is released while the hardtop is
opening, the hardtop stops opening. If the
switch is pressed again, the hardtop
resumes opening.

8. The deck opens.

NOTE

If the windows are closed, the windows
automatically open partially when the deck
opens.

Knowing Your Mazda

Doors and Locks

3-51

MX-5_8DG7-EC-13F_Edition2 Page105
Tuesday, September 24 2013 10:10 AM

Form No.8DG7-EC-13F

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands

Mazda 2014 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands