Mazda 2014 MX-5 Miata Owner'S Manual Download Page 307

Page: 307 / 453

Black plate (306,1)

Jack

To remove the jack

1. Turn the knob and remove the cover.

2. Turn the wing bolt and jack screw

counterclockwise.

Wing bolt

Jack screw

To secure the jack

1. Insert the wing bolt into the jack with

the jack screw pointing back and turn
the wing bolt clockwise to temporarily
tighten it.

2. Turn the jack screw in the direction

shown in the figure.

Wing bolt

Jack screw

3. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.

Maintenance

Always keep the jack clean.

Make sure the moving parts are kept
free from dirt or rust.

Make sure the screw thread is
adequately lubricated.

7-6

In Case of an Emergency

Flat Tire

MX-5_8DG7-EC-13F_Edition2 Page306
Tuesday, September 24 2013 10:12 AM

Form No.8DG7-EC-13F

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands

Mazda 2014 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands