Mazda 2014 MX-5 Miata Owner'S Manual Download Page 107

Page: 107 / 453

Black plate (106,1)

9. The hardtop opens.

10. The hardtop retracts under the deck.

11. The deck closes.

NOTE

When the operation is finished, a beep sound is
heard and the operation indicator light turns
off.

Closing the Power Retractable
Hardtop

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual
transmission in Neutral.

3. Apply the parking brake with the brake

pedal depressed.

4. Start the Engine.

NOTE

Do not open/close the hardtop with the engine
stopped. Otherwise the vehicle's battery power
could be depleted.

5. Press and hold the close button until

the hardtop closes completely.

NOTE

When the close switch is pressed, a beep
sound is heard.

The hardtop keeps closing and the
operation indicator light flashes while the
close switch is pressed.

If the switch is released while the hardtop is
closing, the hardtop stops closing. If the
switch is pressed again, the hardtop
resumes closing.

3-52

Knowing Your Mazda

Doors and Locks

MX-5_8DG7-EC-13F_Edition2 Page106
Tuesday, September 24 2013 10:10 AM

Form No.8DG7-EC-13F

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands

Mazda 2014 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands