Mazda 2014 MX-5 Miata Owner'S Manual Download Page 147

Page: 147 / 453

Black plate (146,1)

Ignition Switch

Auxiliary key (with advanced key)

NOTE

When starting the engine using the advanced
key, refer to Starting the Engine (page 3-11).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-18).

2. Make sure the start knob is in the OFF

position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

4. Insert the auxiliary key in the ignition

switch.

Ignition Switch Positions

With advanced
key

Without advanced
key

OFF

The power supply to electrical devices is
turned off. Only in this position can the
key be removed.

5-2

Driving Your Mazda

Starting and Driving

MX-5_8DG7-EC-13F_Edition2 Page146
Tuesday, September 24 2013 10:11 AM

Form No.8DG7-EC-13F

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands

Mazda 2014 MX-5 Miata, Owner'S Manual

Search results

Summary of Contents for 2014 MX-5 Miata

Reviews:

Related manuals for 2014 MX-5 Miata

Brands by name

Popular brands