Mazda 2014 MX-5 Miata Owner'S Manual Download Page 20 | Manualshive

Page: 20 / 453

Mazda 2014 MX-5 Miata Owner'S Manual Download Page 20

Black plate (19,1)

Seat Belt Precautions

Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and passenger always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.

The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.

However, the passenger's seat lap/shoulder belt retractors operate in two modes: emergency
locking mode, and for child-restraint systems, automatic locking mode.

Essential Safety Equipment

Seat Belt Systems

2-7

MX-5_8DG7-EC-13F_Edition2 Page19
Tuesday, September 24 2013 10:9 AM

Form No.8DG7-EC-13F

«
...
18
19
20
21
22
...
»

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Reviews:

No comments