Home
/
Mazda
/
2014 MX-5 Miata
/
Owner'S Manual

Mazda 2014 MX-5 Miata, Owner'S Manual, Page: 320 / 453

Share

Page: 320 / 453

Mazda 2014 MX-5 Miata Owner'S Manual Download Page 320

Black plate (319,1)

5. Remove the tire blocks and store the

tools, jack, and damaged tire.

6. Check the inflation pressure. Refer to

Tires on page 10-7.

7. Have the flat tire repaired or replaced

as soon as possible.

WARNING

Do not drive with any tires that have
incorrect air pressure:

Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.

NOTE

To prevent the jack and tool from rattling, store
them properly.

(With Tire Pressure Monitoring System)

A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-32).

In Case of an Emergency

Flat Tire

7-19

MX-5_8DG7-EC-13F_Edition2 Page319
Tuesday, September 24 2013 10:12 AM

Form No.8DG7-EC-13F

«
...
318
319
320
321
322
...
»

Summary of Contents for 2014 MX-5 Miata






































































































































































































































































































































































































































































Reviews:

No comments