Mazda 2010 Mazda6, Manual

Page: 368 / 516

q
Clock
NOTE
When the trip computer is being displayed,
press the CLOCK button to change the display
to the time.
The time is displayed when the ignition is
switched to ACC or ON.
Without navigation system
Time setting
1. Turn the ignition switch to the ACC or
ON position.
2. Adjust the time using the time setting
buttons ( , ).
The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button (
) is pressed.
Time resetting (Without trip computer
type only)
1. Turn the ignition switch to the ACC or
ON position.
2. Press and hold the :00 button for 1.5
seconds or more. The displayed time
flashes.
3. When the button is released, the time
will be reset as follows:
(Example)
12:01
―
12:29
→
12:00
12:30
―
12:59
→
1:00
NOTE
When the :00 button is released, the seconds
will start at
“
00
”
.
NOTE
(With trip computer type only)
The clock display can be switched on or off by
pressing the CLOCK button.
With navigation system
Refer to the separate manual
“
NAVIGATION SYSTEM
”
.
NOTE
Minutes and seconds are adjusted by the GPS,
however, it is necessary to adjust hours under
the following conditions:
l
Driving across different time zones
l
Daylight saving time start and end
q
Climate Control Display (Fully
Automatic Type)
The climate control system status is
displayed. To operate the climate control
system, refer to
“
Climate Control System
”
(page 6-2).
q
Audio Display
The audio system status is displayed. To
operate the audio system, refer to
“
Audio System
”
(page 6-16).
6-146
Interior Comfort
Interior Equipment
Mazda6_8AS2-EC-09E_Edition1 Page370
Monday, June 1 2009 4:0 PM
Form No.8AS2-EC-09E