q
How to Arm the System
1. Remove the key from the ignition
switch.
(With advanced key)
Press the push button start to off
position, if the auxiliary key is inserted
in the key slot, remove it.
2. Make sure the hood and the trunk lid
are closed. Close and lock all doors and
the trunk lid from the outside using the
key. If you have the keyless entry
system, press the lock button on the
transmitter.
(With advanced key)
Press a request switch on the doors or
the lock button on the transmitter.
(Without advanced key)
The following method will also arm the
theft-deterrent system:
Close the hood and the trunk lid . Press
the area on the door-lock switch
marked
“ ”
once. Close all doors.
The hazard warning lights will flash
once to indicate that the system is
armed.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the trunk lid
and the hood closed.
3. After 20 seconds, the system is fully
armed.
NOTE
l
The system will disarm if one of the
following operations takes place within 20
seconds after closing the trunk lid and
locking all the doors:
l
Pressing the unlock button on the
transmitter.
l
Any door or the trunk lid is opened.
l
Unlocking a door with the inside door-
lock knob.
l
The hood is opened.
l
The key is inserted in the ignition switch.
l
The auxiliary key inserted into the key
slot (with advanced key).
l
(With advanced key)
The push button start is pressed or a
door is unlocked using the sensor on the
inside of the door handle.
l
The ignition is switched on.
To rearm the system, do the arming
procedure again.
l
When the doors are locked by pressing the
lock button on the transmitter or using the
key while the theft-deterrent system is
armed, the hazard warning lights will flash
once to indicate that the system is armed.
l
There is nothing to sense that a window or
moonroof is open in the system, you must
confirm the windows and moonroof before
you activate the system, and be careful with
the advanced key not to open the windows
and moonroof unintentionally when
unlocking the vehicle.
q
To Turn Off an Armed System
An armed system can be turned off by any
one of the following methods:
l
Unlock a door with the key.
l
Press the unlock button on the keyless
entry system transmitter.
l
Insert the key into the ignition switch
(key slot) and switch the ignition to
ON.
Knowing Your Mazda
Security System
3-61
Mazda6_8AS2-EC-09E_Edition1 Page133
Monday, June 1 2009 3:58 PM
Form No.8AS2-EC-09E
Summary of Contents for 2010 Mazda6
