Mazda 2010 Mazda6, Manual

Page: 332 / 516

3.
Prompt:
“
Would you like to change
the language to French (Desired
language) ?
”
4. Say: [Beep]
“
Yes
”
5. Prompt:
“
Please wait. Switching to
French phonebook. French selected,
returning to main menu
”
(Spoken in
the newly selected language).
Device programming (Pairing)
To use Bluetooth Hands-Free, the device
equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth
audio devices can be programmed to one
vehicle.
NOTE
l
A device can be programmed only when the
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
l
If a Bluetooth device has already been
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
l
Since the communication range of a
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button (with/without
navigation system) or talk button with
a short press (without navigation
system) or a long press (with
navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“
Telephone
”
or
“
Phone
”
.
3. Say: [Beep]
“
Setup
”
4. Prompt:
“
Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
5. Say: [Beep]
“
Pairing options
”
6. Prompt:
“
Select one of the following:
Pair, edit, delete, or list.
”
7.
Say:
[Beep]
“
Pair
”
8.
Prompt:
“
Please say a 4-digit pairing
code.
”
9.
Say:
[Beep]
“
XXXX
”
(Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l
Some devices accept only a particular
pairing code (Usually,
“
0000
”
or
“
1234
”
).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
l
Record the code as it will be used to
program your device in Step 16.
6-110
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
Mazda6_8AS2-EC-09E_Edition1 Page334
Monday, June 1 2009 3:59 PM
Form No.8AS2-EC-09E