Mazda 2010 Mazda6, Manual

Page: 333 / 516

10.
Prompt:
“
Pairing code XXXX (4-
digit number). Is this correct?
”
11. Say: [Beep]
“
Yes
”
or
“
No
”
12. If
“
Yes
”
, go to Step 13.
If
“
No
”
, the procedure returns to Step
8.
13.
Prompt:
“
Start pairing procedure on
the device. See the device manual for
instructions.
”
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select
“
Mazda
”
from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17.
Prompt:
“
Please say the name of the
device after the beep.
”
18. Say: [Beep]
“
XXXX - - -
”
(Speak a
“
device tag
”
, an arbitrary name for
the device.)
Example:
“
Stan's device.
”
NOTE
Speak a programmed
“
device tag
”
within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar
“
device tag
”
.
19. Prompt:
“
Adding XXXXXX - - -
(Ex.
“
Stan's device
”
) (Device tag). Is
this correct?
”
20.
Say:
[Beep]
“
Yes
”
21.
Prompt:
“
Pairing complete
”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after switching the ignition from off
(LOCK) to ACC, the system reads out a
voice guidance,
“
XXXXXX - - - (Ex.
“
Stan's device
”
) (Device tag) is
connected
”
.
NOTE
l
Device registration can also be done by
operating the audio unit or panel buttons
on the navigation unit. Refer to
“
Bluetooth
Audio Preparation
”
(page 6-89)(For audio
unit) or the separate manual
“
NAVIGATION SYSTEM Owner's Manual
”
(For navigation unit).
l
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
q
Making a Call Using a Telephone
Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a non-
taxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
(Type A)
1. Press the pick-up button or talk button
with a short press.
2.
Say:
[Beep]
“
Dial
”
3.
Prompt:
“
Number, please
”
4.
Say:
[Beep]
“
XXXXXXXXXXX (Ex.
“
555-1234
”
) (Telephone number)
”
Interior Comfort
Bluetooth Hands-Free (Voice Recognition)
6-111
Mazda6_8AS2-EC-09E_Edition1 Page335
Monday, June 1 2009 3:59 PM
Form No.8AS2-EC-09E