Mazda 2010 Mazda6 Manual Download Page 439

Page: 439 / 516

6. Install the new bulb in the reverse order

of removal.

High-mount brake light, Ground
illumination lights

Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.

Brake lights/Taillights (Rear side
marker lights)

With LED bulb

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

With Non-LED bulb

1. 1.Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.

Removal

Installation

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

Rear turn signal lights

1. Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.

Removal

Installation

2. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

8-43

Mazda6_8AS2-EC-09E_Edition1 Page441
Monday, June 1 2009 4:0 PM

Form No.8AS2-EC-09E

Summary of Contents for 2010 Mazda6





































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Mazda6

Reviews:

Related manuals for 2010 Mazda6

Brands by name

Popular brands

Mazda 2010 Mazda6, Manual

Search results

Summary of Contents for 2010 Mazda6

Reviews:

Related manuals for 2010 Mazda6

Brands by name

Popular brands