Mazda 2005 323 Owner'S Manual Download Page 222

Page: 222 / 322

Black plate (222,1)

Starting a Flooded Engine

If the engine fails to start, it may be
flooded (excessive fuel in the engine).

Follow this procedure:

1. Depress the accelerator all the way and

hold it there.

2. Turn the ignition switch to the START

position and hold it there

―

for up to 10

seconds. If the engine starts, release the
key and accelerator immediately
because the engine will suddenly rev
up.

3. If the engine fails to start, crank it

without depressing the accelerator

―

for

up to 10 seconds.

7-14

In Case of an Emergency

Emergency Starting

Mazda3_8T66-EA-04H_Edition1 Page222
Thursday, June 24 2004 5:19 PM

Form No.8T66-EA-04H

Summary of Contents for 2005 323



































































































































































































































































































































Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands

Mazda 2005 323, Owner'S Manual

Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands