Mazda 2005 323 Owner'S Manual Download Page 63

Page: 63 / 322

Black plate (63,1)

Limitations to front air bag activation

Depending on the severity of impact, the
front air bags may not inflate in the
following cases:

Impacts involving trees or poles cause
severe cosmetic damage but may not
have enough impact to activate the air
bag.

Frontal offset impact to the vehicle
may not provide the stopping force
necessary for air bag deployment.

Rear-ending or running under a truck's
tail gate may not provide the stopping
force necessary for air bag deployment.

Non-activation of front air bags

Front air bags will not normally inflate in
the following cases:

Collision from the rear.

Impact to the side, but it may deploy
the side and curtain air bags.

Vehicle roll-over, may deploy the side
and curtain air bags but not the front air
bags.

Essential Safety Equipment

SRS Air Bags

2-49

Mazda3_8T66-EA-04H_Edition1 Page63
Thursday, June 24 2004 5:17 PM

Form No.8T66-EA-04H

Summary of Contents for 2005 323



































































































































































































































































































































Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands

Mazda 2005 323, Owner'S Manual

Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands