Mazda 2005 323 Owner'S Manual Download Page 159

Page: 159 / 322

Black plate (159,1)

Windshield Washer

Pull the lever toward you and hold it to
spray washer fluid.

OFF

Washer

NOTE

With the wiper lever in the OFF or INT
(Type A)/AUTO (Type B) position, the
wipers will operate continuously until
the lever is released.

If the washer doesn't work, inspect the
fluid level (page 8-21). If it's OK, consult
an Authorized Mazda Dealer.

Rear Window Wiper and
Washer (5 Door)

The ignition switch must be in the ON
position.

Rear Window Wiper

Turn the wiper on by turning the rear
wiper/washer switch.

―

Normal

INT

―

Intermittent

Rear Window Washer

To spray washer fluid, turn the rear wiper/
washer switch to the

position. After

the switch is released, the washer will
stop.

NOTE

There are two washer positions: up and
down. In the down washer position, the
wiper will not be activated.

If the washer doesn't work, inspect the
fluid level (page 8-21). If it's OK and the
washer still doesn't work, consult an
Authorized Mazda Dealer.

Driving Your Mazda

Switches and Controls

5-49

Mazda3_8T66-EA-04H_Edition1 Page159
Thursday, June 24 2004 5:18 PM

Form No.8T66-EA-04H

Summary of Contents for 2005 323



































































































































































































































































































































Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands

Mazda 2005 323, Owner'S Manual

Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands