Mazda 2005 323 Owner'S Manual Download Page 82

Page: 82 / 322

Black plate (82,1)

Trunk Security

In some situations you may want to
prevent the trunk from being opened with
the remote trunk lid release lever.

Give your key only to someone you trust.

To secure the trunk lid, lock the rear
seatbacks (page 2-7), push the trunk lock
lever up, and close the trunk.

To cancel the security feature, insert the
key into the lock, turn the key clockwise,
and pull the trunk lock lever down.

Unlock

Lock

Trunk lock lever

Trunk Light

The trunk light is on when the lid is open
and off when it's closed.

NOTE

To prevent the battery from being
discharged, do not leave the trunk open
for a long period when the engine is not
running.

3-14

Knowing Your Mazda

Doors and Locks

Mazda3_8T66-EA-04H_Edition1 Page82
Thursday, June 24 2004 5:17 PM

Form No.8T66-EA-04H

Summary of Contents for 2005 323



































































































































































































































































































































Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands

Mazda 2005 323, Owner'S Manual

Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands