Mazda 2005 323 Owner'S Manual Download Page 51 | Manualshive

Page: 51 / 322

background image

Black plate (51,1)

WARNING

Air Bags without Seat Belts:
Depending only on the air bags for protection during an accident is dangerous. Alone,
air bags may not prevent serious injuries. The appropriate air bags can be expected to
inflate only in collisions with frontal, near frontal or side forces that are at least
moderate. Vehicle occupants should always wear seat belts.

Child in the Front Seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. Even if the front
passenger air bag deactivation indicator light illuminates, always move the front
passenger seat as far back as possible. A sleeping child is more likely to lean against
the door and be hit by the side air bag in a moderate, right-side collision. Whenever
possible, always secure a child 12 years and under on the rear seat with an
appropriate child-restraint system for the child's age and size.

Rear-Facing Child-Restraint System:
Rear-facing child-restraint systems on the front seat are particularly dangerous.
The child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child. Even though you may feel
assured that the front passenger air bag will not deploy based on the fact that the front
passenger air bag deactivation indicator light illuminates, NEVER use a rear-facing
child-restraint system in the front seat with an air bag that could deploy even in a
moderate collision.

Seating Position with Front Air Bags:
Sitting too close to the air bag modules or placing hands or feet on them is extremely
dangerous. Front air bags inflate with great force and speed. Serious injuries could
occur if someone is too close. The driver should always hold onto only the rim of the
steering wheel. The front seat passenger should keep both feet on the floor. Front seat
occupants should adjust their seats as far back as possible and always sit upright
against the seatbacks with seat belts worn properly.

Essential Safety Equipment

SRS Air Bags

2-37

Mazda3_8T66-EA-04H_Edition1 Page51
Thursday, June 24 2004 5:17 PM

Form No.8T66-EA-04H

«
...
49
50
51
52
53
...
»

Summary of Contents for 2005 323



































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 323

Brand: Yakima Pages: 12

Automotive 31006

Brand: KRAFTWERK Pages: 2

Brand: Menabo Pages: 12

Tata Indigo Diesel

Brand: TATA Motors Pages: 190

Prime Design HBR-E-FT33B

Brand: Safe Fleet Pages: 12

Brand: Vauxhall Pages: 259

Brand: iArmor Pages: 6

Brand: Camoplast Pages: 19

Speed & Route Profiler

Brand: Racelogic Pages: 24

Brand: ICON Pages: 4

Brand: Skoda Pages: 2

Brand: ORA Pages: 7

Brand: Renault Pages: 3699

Brand: Hyundai Pages: 168

Brand: Suzuki Pages: 504

Brand: Metra Electronics Pages: 17

Brand: Wabtec Pages: 216

ASENTO EV-EXP18R

Brand: ADAPT SOLUTIONS Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands