Mazda 2005 323 Owner'S Manual Download Page 272

Page: 272 / 322

Black plate (272,1)

5 Door

1. Remove the liftgate upper trim.

2. Disconnect the electrical connector

from the socket.

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

5. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

License plate lights

1. Wrap a flathead screwdriver with a soft

cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.

2. Disconnect the bulb by pulling it out.

Edge

3. Install the new bulb in the reverse order

of removal.

Replacing Interior Light Bulbs

Overhead light/Map lights (Front)

1. Wrap a flathead screwdriver with a soft

cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.

8-42

Maintenance and Care

Some models.

Owner Maintenance

Mazda3_8T66-EA-04H_Edition1 Page272
Thursday, June 24 2004 5:20 PM

Form No.8T66-EA-04H

Summary of Contents for 2005 323



































































































































































































































































































































Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands

Mazda 2005 323, Owner'S Manual

Search results

Summary of Contents for 2005 323

Reviews:

Related manuals for 2005 323

Brands by name

Popular brands