Mazda 2005 323 Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 322

background image

Black plate (32,1)

NOTE

To encourage rear seat passengers to
wear their seat belts, we suggest leaving
the rear center lap position of the belt
fastened at all times except when
folding the rear seat forward.

q

Fastening the Lap Portion of the
Seat Belt

Grasp tongue (A) and insert it into the
anchor buckle (B) until you hear a click. It
is now secure for passenger use.

NOTE

After returning the rear-left seatback to
its upright position, fasten the lap
portion of the belt.

Seat Belt Extender

If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.

WARNING

Unnecessary Use of an Extender:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly. In
an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.

Using an Improper Extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt will
not provide adequate protection and
the user could be seriously injured in
an accident. Only use the extender
provided for you and for the particular
vehicle and seat. NEVER use the
extender in a different vehicle or seat.

2-18

Essential Safety Equipment

Seat Belt Systems

Mazda3_8T66-EA-04H_Edition1 Page32
Thursday, June 24 2004 5:17 PM

Form No.8T66-EA-04H

«
...
30
31
32
33
34
...
»

Summary of Contents for 2005 323



































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 323

Brand: Falcon Pages: 8

Brand: Feniex Pages: 6

Brand: Vauxhall Pages: 323

Brand: Carcomm Pages: 2

Brand: Whispbar Pages: 14

Brand: Dometic Pages: 158

2004 Vibe Navigation System

Brand: Pontiac Pages: 44

Carpower CAP-20

Brand: Monacor Pages: 2

Brand: Cadillac Pages: 522

Brand: Prorack Pages: 15

Brand: Pontiac Pages: 486

Brand: Brink Pages: 26

Dynamic Power Management Home - Module

Brand: newmotion Pages: 20

Escalade 2004 Escalade ESV

Brand: Cadillac Pages: 472

Brand: Mercedes-Benz Pages: 284

DODGE AD100 1993

Brand: Chrysler Pages: 1502

Brand: Kuda Pages: 4

10-8002-C12167A

Brand: Saleen Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands