Black plate (71,1)
Keyless Entry System
í
This system locks and unlocks the doors
and the liftgate.
It can also help you signal for attention in
an emergency.
Press the button slowly and accurately.
CAUTION
To avoid damage to the transmitter, do
not:
l
Drop it.
l
Get it wet.
l
Disassemble it.
l
Expose it to heat or sunlight.
NOTE
l
The keyless entry system is designed
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
l
The system doesn't operate when the
key is in the ignition switch.
l
Doors cannot be locked by pressing
the lock button while any other door
is open. The hazard warning lights
will also not flash.
l
If the transmitter does not operate
when pressing a button or the
operation range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-5).
l
Additional transmitters can be
obtained at an Authorized Mazda
Dealer. Up to 3 transmitters can be
used with the keyless entry system
per vehicle. Bring all transmitters to
an Authorized Mazda Dealer when
the electronic codes need to be reset.
Knowing Your Mazda
Doors and Locks
3-3
í
Some models.
Mazda3_8T66-EA-04H_Edition1 Page71
Thursday, June 24 2004 5:17 PM
Form No.8T66-EA-04H
