Mazda 2005 323 Owner'S Manual Download Page 28 | Manualshive

Page: 28 / 322

background image

Black plate (28,1)

Front Seat Belt
Pretensioner and Load
Limiting Systems

For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems.
In moderate or greater frontal or near-
frontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The pretensioners take up
slack in the front seat belts as the air bags
are expanding. The seat belt pretensioner
system will not activate if the seat belt is
not fastened, only you can be sure it is
worn properly. The load limiting system
releases belt webbing in a controlled
manner to reduce belt force on the
occupant's chest.

WARNING

Incorrect Positioning of the Driver
and Front Passenger Seat Belts:
Incorrect positioning of the driver and
passenger seat belts is dangerous.
Without proper positioning, the
pretensioner and load limiting systems
cannot provide adequate protection in
an accident and this could result in
serious injury. Wear seat belts only as
recommended in this owner's manual.

WARNING

Expended Seat Belt Pretensioners:
Use of front seat belts with the
pretensioner system expended is
dangerous.
The seat belt pretensioners will only
function once. After they are
expended, they will not work again
and must be replaced immediately.
If the seat belt pretensioners are not
replaced, the risk of injury in a
collision will increase.
Always have an Authorized Mazda
Dealer inspect the seat belt
pretensioners and air bags after any
collision. The seat belt pretensioners
and air bags must be replaced after
any collision, which causes them to
deploy.

Modification or Testing of the
Pretensioner System:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable which
would prevent it from activating in an
accident. The occupants or repairers
could be seriously injured. Never
modify the components or wiring, or
use electronic testing devices on the
pretensioner system.

2-14

Essential Safety Equipment

Seat Belt Systems

Mazda3_8T66-EA-04H_Edition1 Page28
Thursday, June 24 2004 5:17 PM

Form No.8T66-EA-04H

«
...
26
27
28
29
30
...
»

Summary of Contents for 2005 323



































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 323

Brand: Quadratec Pages: 8

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

NPL-TV 7874 DIGITAL

Brand: Napoli Pages: 20

MagicWatch MWE800

Brand: Waeco Pages: 212

Gasoline/Electric DS Golf Car 1996

Brand: Club Car Pages: 48

WrapAround Windjammer

Brand: Bestop Pages: 7

Brand: Honda Pages: 208

Brand: Dodge Pages: 24

Brand: P-Invent Pages: 4

Brand: Billien Pages: 2

Brand: Lexus Pages: 28

Brand: Vauxhall Pages: 95

Brand: GYS Pages: 32

Brand: Vmac Pages: 16

Brand: Ford Pages: 312

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands