Maxwell MW-3508 GY, Manual Instruction

Page: 10 / 36

10
ENGLISH
10
–
Assemble the fan following the assembling instruc-
tions (see the chapter «Before the first use»).
–
Do not immerse the fan, the power cord and the
plug into water or other liquids.
Storage
–
Unplug the unit and clean it.
–
If necessary disassemble the fan. Remove the fixing
ring (2), the front grid (1), then the blades (4) and
the rear grid (6). Loosen the clamp (11) and take
the body (8) off the telescopic bar (12), disconnect
the stand (14) having unscrewed 4 screws from the
base (16).
– Put the fan into the packing.
–
Keep the unit away from children in a dry cool place.
delivery set
Fan head – 1 pc.
Front grid – 1 pc.
Fixing ring with screw and nut – 1 pc.
Blade clamp – 1pc.
Blades – 1 pc.
Plastic nut – 1 pc.
Rear grid – 1 pc.
Stand with telescopic bar and decorative panel – 1 pc.
Base – 1 pc.
Screw – 4 pc.
Instruction manual – 1 pc.
technical specifications
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 60 W
Diameter: 40 cm (16”)
FM: 66 - 108 MHz
The manufacturer preserves the right to change the
specifications of the units without a preliminary noti-
fication
Unit operating life is 3 years.
The manufacturer preserves the right to change design
and specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of
this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low Voltage
Regulation (2006/95/ЕС)
MW-3508_IM.indd 10 25.11.2013 16:47:36